Search

Star Dust Iron-on Bulk Sparkling Purple

    Star Dust Iron-on in bulk.
    20" pricing:
    5 yd roll = $60
    10 yd roll = $115
    25 yd roll = $275
    50 yd roll = $500

    You must try our Star Dust out if you are bored with glitter! 
It has a slightly glitter finish and a soft hand feel, shines bright like a diamond when illuminated by highlight even makes it one of a kind! Easy to cut/weed and extremely durable when applied properly.

    Star Dust Iron-on is certified by OEKO-TEX® Standard 100, so it’s safe on garments for all ages, moreover, applies at the lowest temperature among competitor materials on the market.

    Apply standard 260 degree for all our Easy260™ iron-on vinyls! No more temperature charts needed! More applicable garments and more possibilities!!
    Due to the manufacturing process, material may vary in width by 1/8-1/4 inch
*
$60.00
i h
Delivery date: 3-5 days

SPECIFICATIONS:
Type: Heat Transfer Vinyl (Iron-on Vinyl) 

Thickness: 200 microns/ 0.2 mm
Easy260™ process: Yes
Temperature: 260°F/126°C
Settings for regular iron: Silk/Medium or higher (NO higher than Wool)
Time: 30 Seconds
Pressure: Medium
Peel: WARM or COOL

Layer: Can be layered
Composition: Polypropylene (PP), Polyurethane (PU)
Safety: CPSIA certified/OEKO-TEX® Standard 100 in APPENDIX 6, Class II certified/Compliance with California Prop 65
 
APPLIES TO
100% Cotton  •  100% uncoated Polyester  •  Silk  •  Poly/Cotton blends  •  Lycra®/Spandex  •  Leather  •  Fake Leather  •  Paper  •  Rayon and more.
 
ADDITIONAL INSTRUCTIONS:
Cut settings: 
Please cut on the glue side(load to the machine with shiny side down), and cut with mirror mode on(reverse).
Kiss Cut means the machine cut though the glue and material only, leave the carrier in one piece.
Die cut means all the layers are cut and separate the design into individual parts.
 
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test cutting is recommended.
Kiss Cut: Iron-On+
Die Cut: Poster Board+
Pressure: Default
Cut Settings for Silhouette® Cameo: 
Settings can alter on how dull or sharp the blade is. Test cutting is recommended.
Kiss Cut:
Material: Heat Transfer, Glitter
Die Cut: 
Material: Heat Transfer, Glitter
Passes 2 times
 
Pressing instructions: 
We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.
If you used regular iron instead of heat press, we highly recommend to cover your garment and the vinyl with parchment paper/cotton cloth when applying. This prevents overheating and also equalize the uneven temperature of iron plate a bit.
 
CARE INSTRUCTIONS:
Do not iron the peeled vinyl without covering with parchment paper/carrier sheet/ cotton cloth •  Do not dry clean  •  Machine wash WARM / mild detergent  •  Dry at normal setting  •  No chlorine bleach  •  Wait 24 hours before first wash

SPECIFICATIONS:
Type: Heat Transfer Vinyl (Iron-on Vinyl) 

Thickness: 200 microns/ 0.2 mm
Easy260™ process: Yes
Temperature: 260°F/126°C
Settings for regular iron: Silk/Medium or higher (NO higher than Wool)
Time: 30 Seconds
Pressure: Medium
Peel: WARM or COOL

Layer: Can be layered
Composition: Polypropylene (PP), Polyurethane (PU)
Safety: CPSIA certified/OEKO-TEX® Standard 100 in APPENDIX 6, Class II certified/Compliance with California Prop 65
 
APPLIES TO
100% Cotton  •  100% uncoated Polyester  •  Silk  •  Poly/Cotton blends  •  Lycra®/Spandex  •  Leather  •  Fake Leather  •  Paper  •  Rayon and more.
 
ADDITIONAL INSTRUCTIONS:
Cut settings: 
Please cut on the glue side(load to the machine with shiny side down), and cut with mirror mode on(reverse).
Kiss Cut means the machine cut though the glue and material only, leave the carrier in one piece.
Die cut means all the layers are cut and separate the design into individual parts.
 
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test cutting is recommended.
Kiss Cut: Iron-On+
Die Cut: Poster Board+
Pressure: Default
Cut Settings for Silhouette® Cameo: 
Settings can alter on how dull or sharp the blade is. Test cutting is recommended.
Kiss Cut:
Material: Heat Transfer, Glitter
Die Cut: 
Material: Heat Transfer, Glitter
Passes 2 times
 
Pressing instructions: 
We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.
If you used regular iron instead of heat press, we highly recommend to cover your garment and the vinyl with parchment paper/cotton cloth when applying. This prevents overheating and also equalize the uneven temperature of iron plate a bit.
 
CARE INSTRUCTIONS:
Do not iron the peeled vinyl without covering with parchment paper/carrier sheet/ cotton cloth •  Do not dry clean  •  Machine wash WARM / mild detergent  •  Dry at normal setting  •  No chlorine bleach  •  Wait 24 hours before first wash