Search

Ready-to-iron #185104 Ride It & Live

    Add a designer touch in no time with Ready-to-iron designs!

    SPECIFICATIONS:
    Type: Heat Transfer Vinyl (Iron-on Vinyl)
    Width: 6.5 inches
    Length: 7.5 inches
    Easy260™ process: NO
    Temperature: 300°F/149°C
    Settings for regular iron: Wool to Cotton
    Time: 15-30 seconds both side
    Pressure: FIRM
    Peel: WARM or COOL
    Layer: NO
    Safety: CPSIA certified/Compliance with California Prop 65

    Recommended for:
    T-shirts, baby onesies, tote bags and more.
$4.99
$1.29
i h
Application
Use with pre-washed materials.
 
For regular iron
1.Set your iron to scale between Wool and Cotton. Please make sure steam is OFF.
2.Preheat your material for 15 to 20 seconds.
3.Place the design onto the preheated material.
4.Cover a cotton cloth on the ready-to-iron design.
5.Heat each part of the design for 15-30 seconds with FIRM pressure.
6.Flip base material over and heat back side of the design for 15-30 seconds.
7.Make sure the whole design applied with heat.
8.Let cool 1 to 2 minutes and remove the carrier.
 
For heat press
1.Set heat press to 300°F.
2.Preheat your material for 15 to 20 seconds.
3.Place the design onto the preheated material.
4.Heat each part of the design for 15-30 seconds with FIRM pressure.
5.Flip base material over and heat back side of the design for 15-30 seconds.
6.Let cool 1 to 2 minutes and remove the film.
 
 
Care instructions
1. Wait 24 hours before washing for the first time. Turn garment inside out before washing.
2. Wash and tumble dry on low heat. 
3. If you need to iron, turn garment inside out and iron the back side.
4. Do not bleach or dry clean. 
0.0 0
Write your own review Close
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
Application
Use with pre-washed materials.
 
For regular iron
1.Set your iron to scale between Wool and Cotton. Please make sure steam is OFF.
2.Preheat your material for 15 to 20 seconds.
3.Place the design onto the preheated material.
4.Cover a cotton cloth on the ready-to-iron design.
5.Heat each part of the design for 15-30 seconds with FIRM pressure.
6.Flip base material over and heat back side of the design for 15-30 seconds.
7.Make sure the whole design applied with heat.
8.Let cool 1 to 2 minutes and remove the carrier.
 
For heat press
1.Set heat press to 300°F.
2.Preheat your material for 15 to 20 seconds.
3.Place the design onto the preheated material.
4.Heat each part of the design for 15-30 seconds with FIRM pressure.
5.Flip base material over and heat back side of the design for 15-30 seconds.
6.Let cool 1 to 2 minutes and remove the film.
 
 
Care instructions
1. Wait 24 hours before washing for the first time. Turn garment inside out before washing.
2. Wash and tumble dry on low heat. 
3. If you need to iron, turn garment inside out and iron the back side.
4. Do not bleach or dry clean.